Importing Data

Summary

Data from Humboldt equipment can be imported into all NEXT test modules except for the User Defined test module.  

NOTE:  The 5000 series data exports data to USB stick with extension .HTD.  At this time the .HTD file can not be opened directly from the NEXT file create/open window.  The .HTD files are only test results from the 5000 series equipment as such the .HTD files must be imported into an existing NEXT test.

Procedure Initial

1. Run a test with Humboldt equipment.
2. Open the Humboldt NEXT testing module where data will be imported to and create a new test or open an existing test.
3. Select the specimen and phase (if applicable) to import the data into.
4. Select the Edit tab.
5. Click Edit Selected Tab Data button if options in Edit tab are grayed out.
6. Click the Import Data button and select Attached Logger option to open import window.

5000 Series Data Import

[IMAGE A]

Network Import

1. Under the Network Attached Logger tab select the drop-down list box and select your logger.
2. List of available tests can be navigate.
3. Select the date the test was performed.
4. Select the file.
5. A preview of the data will be shown.
6. If this is not the data you would like to import, select a different file.
7. Once you have found the data you want, click the Import button.
8. This data will be imported into the selected specimen.

Local File Import

1. Under the Network Attached Logger tab click the Open File button at the bottom right.
2. In the Open File Dialog select the file you would like to open.
3. A preview of the data will be shown.
4. Click the Import button.
5. This data will be imported into the selected specimen.

3000 Series Import

1. Select the Serial Logger tab.
2. A list of available devices will be shown.
3. Double-click on the device you would like to retrieve data from.
4. A preview of the data will be shown in ASCII text.
5. Click the Import button when satisfied with the data.
6. This data will be imported into the selected specimen.

From File Import

[IMAGE C]

1. Click the Open File Button.
2. Select the file to import.
3. Summary of the data to import will be shown in the preview window.
4. Click the Import button.
5. This data will be imported into the selected specimen.