Create Calibration Backups

Summary

Before installing a new calibration or in the event calibrations have been changed you may want to backup the calibrations on the HM-3000 series of equipment.  

Procedure

1. Power OFF the equipment.
2. Hold the F1 key.
3. Power ON the equipment while still holding the F1 key.
4. You will hear one quick beep.
5. Release the F1 key.
6. After the system boots up you will notice the inputs on the main screen appear to be frozen.  If they are not please repeat steps 1 - 5 again.
7. Press the F1 key.
8. You will hear 4 beeps and the inputs on the main screen will not be frozen anymore.
9. The calibrations are now backed up.