In troubleshooting various issues you may be asked to remove or modify the contents of the SD card. To remove it you will need to perform the following steps:
- Remove the six black screws around the perimeter of the front panel
- Carefully tilt the top of the front panel toward you (it may take a bit of force to un-stick the gasket)
- On the back of the front panel is a red circuit board. The micro SD card is in a socket on the left side of this board. Slide the metal bracket up (toward you) and then swing the bottom of the card out to remove it (reverse of the below):
Installation is the reverse of removal.
Article is closed for comments.